Tahoe – Cabinet Series


Materials and Construction

• Traditional face frame construction.
• Face frames are solid 3/4” thick with 1-1/2” stiles and rails. Joints are mortise and tenon.
• Sides are Birch veneered 1/2” plywood. The interior features a clear-coat finish and the exterior is finished to match door selection.
• Shelves are 5/8” thick Birch veneered plywood sealed with a clear-coat, adjustable and front edge banded.
• Backs are 1/8” thick, dadoed into the cabinet sides. For ease of installation, backs are framed with a 1/2” plywood hanging rail. Base cabinet       backs extend to the floor providing optimal structural stability.


• Made of 5/8” thick solid hard wood, dovetailed in each corner and clear-coated.
• Bottoms are 1/4” birch plywood fully captured.
• Slides are undermounted full-extension soft close.
• Drawer fronts are full overlay 5 piece construction.


• Mortise and Tenon
• Doors are full overlay with applied moulding. Stiles and rails are 2” wide. The raised center panel is solid wood.


• Catalyzed Conversion Varnish top coat with UV protection is applied to doors, drawers and face frames.
• Glazing is applied to the doors and drawer fronts